01 (GMT-11:00) Midway Island, Samoa
02 (GMT-10:00) Hawaii
03 (GMT-9:00) Alaska
04 (GMT-8:00) Pacific Time (US & Canada)
05 (GMT-7:00) Arizona
81 (GMT-7:00) Baja California Sur, Chihuahua
06 (GMT-7:00) Mountain Time (US & Canada)
07 (GMT-6:00) Central America
08 (GMT-6:00) Central Time (US & Canada)
09 (GMT-6:00) Mexico City
10 (GMT-6:00) Saskatchewan
11 (GMT-5:00) Bogota, Lima,Quito
12 (GMT-5:00) Eastern Time (US & Canada)
13 (GMT-5:00) Indiana (East)
74 (GMT-4:00) Caracas
14 (GMT-4:00) Atlantic Time (Canada)
77 (GMT-4:00) Georgetown
15 (GMT-4:00) La Paz
87 (GMT-4:00) Paraguay
16 (GMT-3:00) Santiago
17 (GMT-3:30) Newfoundland
18 (GMT-3:00) Brasilia
19 (GMT-3:00) Buenos Aires
20 (GMT-3:00) Nuuk (Greenland)
75 (GMT-3:00) Uruguay
21 (GMT-2:00) Mid-Atlantic
22 (GMT-1:00) Azores
23 (GMT-1:00) Cape Verde Is.
24 (GMT) Monrovia
80 (GMT) Greenwich Mean Time
79 (GMT) Casablanca
25 (GMT) Dublin, Edinburgh, Lisbon, London, Canary Is.
26 (GMT+1:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
27 (GMT+1:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague
28 (GMT+1:00) Brussels, Copenhagen, Madrid, Paris
78 (GMT+1:00) Namibia
29 (GMT+1:00) Sarajevo, Skopje, Warsaw, Zagreb
30 (GMT+1:00) West Central Africa
31 (GMT+2:00) Athens, Sofia, Vilnius
32 (GMT+2:00) Bucharest
33 (GMT+2:00) Cairo
34 (GMT+2:00) Harare, Pretoria
35 (GMT+2:00) Helsinki, Riga, Tallinn
36 (GMT+2:00) Jerusalem
37 (GMT+3:00) Baghdad
38 (GMT+3:00) Kuwait, Riyadh
83 (GMT+3:00) Moscow
84 (GMT+3:00) Minsk
40 (GMT+3:00) Nairobi
85 (GMT+3:00) Istanbul
41 (GMT+3:30) Tehran
42 (GMT+4:00) Abu Dhabi, Muscat
43 (GMT+4:00) Baku
39 (GMT+3:00) St. Petersburg, Volgograd
44 (GMT+4:30) Kabul
46 (GMT+5:00) Islamabad, Karachi, Tashkent
47 (GMT+5:30) Kolkata, Chennai, Mumbai, New Delhi
51 (GMT+5:30) Sri Jayawardenepara
48 (GMT+5:45) Kathmandu
45 (GMT+5:00) Ekaterinburg
49 (GMT+6:00) Almaty, Novosibirsk
50 (GMT+6:00) Astana, Dhaka
52 (GMT+6:30) Rangoon
53 (GMT+7:00) Bangkok, Hanoi, Jakarta
54 (GMT+7:00) Krasnoyarsk
55 (GMT+8:00) Beijing, ChongQing, HongKong, Urumgi, Irkutsk
56 (GMT+8:00) Ulaan Bataar
57 (GMT+8:00) Kuala Lumpur, Singapore
58 (GMT+8:00) Perth
59 (GMT+8:00) Taipei
60 (GMT+9:00) Osaka, Sapporo, Tokyo, Seoul
62 (GMT+9:30) Adelaide
63 (GMT+9:30) Darwin
61 (GMT+9:00) Yakutsk
64 (GMT+10:00) Brisbane
65 (GMT+10:00) Canberra, Melbourne, Sydney
66 (GMT+10:00) Guam, Port Moresby
67 (GMT+10:00) Hobart
68 (GMT+10:00) Vladivostok
69 (GMT+10:00) Magadan
70 (GMT+11:00) Solomon Is., New Caledonia
71 (GMT+12:00) Auckland, Wellington
72 (GMT+12:00) Fiji, Kamchatka, Marshall Is.
00 (GMT+12:00) Eniwetok, Kwajalein
82 (GMT+12:45) Chatham Islands
73 (GMT+13:00) Nuku’alofa
86 (GMT+13:00) Samoa
76 (GMT+14:00) Kiritimati
RIP Arecibo Antenna
CISCO WLC AP Naming
You can quickly change the name of the AP on a Cisco WLC using the following CLI Syntax.
(Cisco Controller) config>ap name NAME MAC
ap name AP01-Valhalla ab:cd:ef:00:01:02
DHCP Tutorial
But It HAS Wi-Fi!!!
WLAN Pi and Comfast CF-912AC Adapter
You can use the Comfast CF-912AC adapter as a Wifi adapter on the nanopi
Assuming there is a DHCP server running on your network, SSH to the IP indicated on the screen
Log in to the wlanpi
username: wlanpi
password: wlanpi
I normally run as root so I do not have to always elevate
_ _ ____ _ _ _ ____ | \ | | _ \(_) | \ | | ___ ___ |___ \ | \| | |_) | | | \| |/ _ \/ _ \ __) | | |\ | __/| | | |\ | __/ (_) | / __/ |_| \_|_| |_| |_| \_|\___|\___/ |_____| Welcome to Debian Stretch with Armbian Linux 4.19.66-sunxi64 System load: 0.24 0.12 0.09 Up time: 39 min Memory usage: 20 % of 993MB IP: 192.168.16.113 CPU temp: 38°C Usage of /: 21% of 15G [ Menu-driven system configuration (beta): sudo apt update && sudo apt install armbian-config ] Last login: Thu Oct 31 17:22:28 2019 from 192.168.16.101 wlanpi@wlanpi:~$ sudo su wlanpi
I prefer to navigate to the webserver downloads folder so that I can easily pull the file from the device
cd /var/www/html/downloads
Determine how the adapter is named in your device
root@wlanpi:/var/www/html/downloads# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 10000 link/ether 02:01:5b:1b:4c:86 brd ff:ff:ff:ff:ff:ff inet 192.168.16.113/24 brd 192.168.16.255 scope global eth0 valid_lft forever preferred_lft forever 3: usb0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether 7e:60:c2:c2:98:66 brd ff:ff:ff:ff:ff:ff inet 192.168.42.1/27 brd 192.168.42.31 scope global usb0 valid_lft forever preferred_lft forever 4: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ieee802.11/radiotap 40:a5:ef:4f:11:f6 brd ff:ff:ff:ff:ff:ff root@wlanpi:/var/www/html/downloads#
The adapter shows up as wlan0 in this example
Determine which channel you would like to capture
Select the channel of the wlan0 interface by entering the following command based upon the channel
iwconfig wlan0 channel 60
Now we can use tcpdump to capture on this channel
tcpdump -i wlan0 -w wlan0-60.pcap
Open a browser and navigate to the ip of the wlanpi
Click on Downloads
Open your pcap file
To remove the files off the wlanpi, use the rm command. Be careful with this command
root@wlanpi:/var/www/html/downloads# ls iPerf SSH_client Wireshark wlan0-1.pcap wlan01.pcap wlan0-36.pcap wlan0-60.pcap wlan06.pcap wlan0.pcap root@wlanpi:/var/www/html/downloads# rm wlan0-1.pcap wlan01.pcap wlan0-36.pcap wlan0-60.pcap wlan06.pcap wlan0.pcap root@wlanpi:/var/www/html/downloads# ls iPerf SSH_client Wireshark root@wlanpi:/var/www/html/downloads#
Starting Kismet
Disabled Kismet from running at startup, can now be launched from the front panel menu or from shell by typing kismet
Adding Drivers for Proxim 8494
The wlanpi needs to download the drivers using the following command
apt-get install firmware-linux-free
Insert your Atheros AR9170 devices (carl9170) device into the wlanpi
Run this command to determine if wlan0 interface is present
root@wlanpi:/home/wlanpi# iwconfig lo no wireless extensions. eth0 no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11 Mode:Monitor Frequency:2.412 GHz Tx-Power=30 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off
ARP Tutorial
I put together a short tutorial explaining how to use ARP to find out about network subnetting.
OWE Opportunistic Wireless Encryption
Open wireless networks have been a hackers dream for years. When the packets are not encrypted at the MAC layer, information can be captured in public spaces for any number of questionable purposes. Rasika has posted a great article on his website explaining how it works.
Enhanced Open – Part 1
WLAN Pi Assembly
Wifi Viking assembles a WLAN Pi. This little server is a very powerful WLAN troubleshooting device.
Project website is available @ http://www.wlanpi.com/
Things I have already done…
iPerf
wlan tcpdumps
ethernet tcpdumps
speedtests
curling websites
I ordered mine from https://www.friendlyarm.com/index.php?route=product/product&product_id=189
Paid for DHL delivery. Was quite fast.